4K is the next big leap in televisions and, if you know anything about it already, you’re ahead of the curve. If you don’t, well, you’ve come to the right place. We started with standard definition resolutions, before ten years ago high-definition took over. 4K is the next big step. And what a step it is.
4K has roughly the pixel count of four Full HD 1080p screens arranged in a two by two grid, which means it’s capable of much more detail.
What this means is incredibly lifelike and detailed images, even at screen sizes in excess of 50-inches.
The reason for this has to do with the amount of pixels a 4K TV contains. Whereas traditional HD is limited to 1920 vertical columns and 1080 horizontal rows of pixels, Ultra HD has a total resolution of 3840 pixels by 2160 – a slightly smaller resolution than the 4,096 x 2,160 resolution seen on cinema screens (that, for the record, is called Cinema 4K).
We’re used to being slightly wary of new television technologies that try to entice us into parting with our hard-earned cash (thanks 3D), but when it comes to 4K there are relatively few downsides – aside from the lack of native 4K content out there right now.
- Check out our guide to the best 4K TVs.
It used to be the case that you’d have to part with thousands in order to purchase a 4K set, but as technology has improved, prices are rapidly falling with even budget sets now being 4K-compatible.
At the end of the day it might not be the raw resolution of 4K that tempts you into your next TV purchase, but the inclusion of other cool technologies like High-Dynamic Range, Quantum Dot and OLED panels. Before we get into the specifics of each technology, here’s a video outlining 4K in a nutshell.
Check out our video below for an introduction to the world of 4K.
What is 4K?
Pure and simple, 4K means a clearer picture. It’s more pixels (8,294,400 to be exact) on the screen at once that creates images that are crisper and capable of showing more details than standard HD.
What is the resolution of 4K?
4K resolution, at least the way most TVs define it, is 3840 x 2160 or 2160p. To put that in perspective, a full HD 1080p image is only a 1920×1080 resolution. 4K screens have about 8 million pixels, which is around four times what your current 1080p set can display.
Think of your TV like a grid, with rows and columns. A full HD 1080p image is 1080 rows high and 1920 columns wide. A 4K image approximately doubles the numbers in both directions, yielding approximately four times as many pixels total. To put it another way, you could fit every pixel from your 1080p set onto one quarter of a 4K screen.
Why is it called 4K?
Because the images are around 4,000 pixels wide. And before you ask, yes, the industry named 1080 resolution after image height, but named 4K after image width. For extra added fun, you also might hear this resolution referred to as 2160p. Welcome to the future. It’s confusing here.
Do all those extra pixels matter?
They matter very much. More pixels means more information. More information means sharper pictures. Sharper pictures are more engaging. More engaging content is more fun. And fun… well fun is the thing, isn’t it?
So I’ll see a huge difference?
That’s where it gets sticky. We’re talking about a similar jump in resolution as the one from SD (480 lines high) to HD (1080 lines high). And 4K screens are noticeably sharper than 1080p screens. But there are a few reasons you might not feel the same thrill you did when you upgraded your old CRT to a flatscreen.
When most people went from a 480 to a 1080p set, there was a good chance they were making a big jump in TV size as well. In terms of wow factor, display size is more powerful than any resolution jump could ever hope to be. Last time around most people got big jumps to both screen size and resolution. But this time screen sizes are staying about the same, with the most popular models falling in the 40 inch to 70 inch range.
Most importantly, though, you’ll only be able to see the resolution difference on a 4K set if you’re 1) watching 4K content through it and 2) you’re sitting close enough.
Sitting close enough?
Yup. Remember when Apple made a big fuss about “retina” displays a few iPhones back? “Retina” refers to screens that have sufficient resolution that at a normal viewing distance your eye can’t make out individual pixels. Get far enough away from a 1080p set and, hey presto, It’s a retina display! More importantly, at that same distance, your eyeballs won’t be able to squeeze any more detail out of a 4K image than a 1080 one. If you’re at “retina distance” from your 1080p set now and don’t plan on moving your couch closer, upgrading to 4K may not make a big difference to your experience. This chart shows how close you need to sit at any given screen size to see the difference.
So I should sit closer?
Oh my yes. The ability to get up close to the screen without the image breaking down is one of the most intoxicating things about 4K. Sitting closer allows the same sized screen to fill more of your visual field, which yields greater immersion. The up-close factor is one of the reasons 4K computer monitors have become one of the technology’s fastest growing sectors. 4K monitors remain pin-sharp even when you’re just a foot or two from the screen, as you are when you’re sitting at your desk.
Difference between Ultra HD and 4K
Technically, “Ultra High Definition” is actually a derivation of the 4K digital cinema standard. However while your local multiplex shows images in native 4096 x 2160 4K resolution, the new Ultra HD consumer format has a slightly lower resolution of 3840 X 2160.
This is one reason why some brands prefer not to use the 4K label at all, sticking with Ultra HD or UHD instead. However, the numerical shorthand looks likely to stick. As a broad brush label it’s so much snappier!
Why should I care about 4K Ultra HD?
There are many reasons why 4K should make you rethink your next TV purchase (actually, there are eleven and you can read about them here), not all of them immediately obvious.
Photographers who routinely view their work on an HD TV are seeing but a fraction of the detail inherent in their pictures when they view them at 2160p.
A 4K display reveals so much more nuance and detail – the difference can be astonishing. While 3D has proved to be a faddish diversion, 4K comes without caveats. Its higher resolution images are simply better.
The higher pixel density of a 4K panel also enable you get much closer without the grid-like structure of the image itself becoming visible –this means you can comfortably watch a much larger screen from the same seating position as your current Full HD panel. Currently all available 4K Ultra HD TVs are in excess of 50-inches.
Ultra HD Premium
If you’re sitting there thinking that all these new technologies and acronyms sound confusing then you’d be right. That’s why a group of companies decided to form the UHD Alliance with the expressed aim of defining what technologies should be included in the next generation of TV sets.
The UHD Alliance is comprised of 35 companies including television manufacturers such as LG, Panasonic, Samsung, Toshiba, Sony, Sharp, audio companies such as Dolby, and film and television production companies such as Netflix and 20th Century Fox.
The idea then is that if everyone can agree on what features they think UHD should include then Disney (an example member of the alliance) can produce a movie that Netflix will be able to stream through a Samsung TV, and the eventual image will be exactly what the director at Disney intended.
The result of this alliance was the UHD Premium specification announced at CES 2016. The specification comprises a list of features that should be included in products like TVs and Blu-ray players to ensure maximum compatibility with other content and hardware produced.
Currently, in order to adhere to the UHD Premium specification a product must have:
- A resolution of at least 3840×2160
- 10-bit color depth, allowing for 1,024 shades of each of the RGB channels, as opposed to the 256 allowed by the current 8-bit standard.
- Be capable of displaying pixels at a certain brightness and darkness for HDR purposes (technically this light level is from 0.05 to 1,000 ‘nits’ for LEDs and 0.0005 to 540 ‘nits’ for OLED sets for all you number lovers out there). Adhering to these standards means blacks should look truly dark as opposed to just milky black and whites should really pop.
Now that this standard has been defined it should just be a case of checking that your next purchase has the ‘Ultra HD Premium’ logo and not having to worry about your set being incompatible with the slew of 4K content that’s about to emerge over the next few years.
Except of course it’s not that simple.
Samsung and Panasonic are embracing the new standard, with both of their flagship lineups wearing their UHD Premium badges with pride. Sony however have decided to go down a more confusing route and have decided to stick with their internal ‘4K HDR’ label despite their sets all actually meeting the required specification. Philips won’t be using the alliance’s badge, but its sets don’t currently meet the specification anyway.
It’s only natural that while a technology is still emerging these problems will continue to exist, but we hope that soon we’ll be able to recommend looking for a UHD Premium set without reservation. Until the whole industry unambiguously backs the standard however, we’d still recommend you tread carefully to ensure maximum compatibility.
You also said “and up.” Can UHD also designate higher resolutions than 4K?
Yes. This is the slightly confusing part. An 8K display would also be UHD.
What is this 8K you speak of?
It’s the next resolution standard up from 4K. Basically it doubles the pixel height and width again to yield approximately 32 million pixels. It’s a regular pixel party.
That sounds awesome. Should I just get one of those?
Absolutely not. The 8K standard is primarily for the exhibition market (aka movie theaters). To make that many pixels matter, you need to be feeding a truly gigantic screen and sitting right in front of it. Besides, you can’t buy an 8K screen today without having it custom built, which would cost approximately seven hojillion dollars. And there’s no commercially available 8K content. You’d need to get movies directly from distributors the same way theaters do. You do not need this unless you are Jerry Bruckheimer. (If you are Jerry Bruckheimer, though, give me a call. I know a guy.)
My friend told me about 4K OLED. What’s that?
More acronyms! Isn’t this fun? OLED – organic light emitting diodes – have been around for some time, but producing big screens using this technology has proven to be prohibitively expensive, something which has so far prevented OLED television from being a mainstream proposition.
It’s a real shame because OLED technology can be stunning, offering vibrant colors, deep blacks and bright whites. But don’t give up hope just yet. Several companies (most prominently LG) are laboring away to bring OLED to 4K televisions. We recently took a look at LG’s new 4K OLED sets, but while they’re gorgeous, pricing remains sky high. Hopefully that will change soon, though. “I believe the price and yield rate will be higher immediately and the price will be down,” Mr K I Kwon, president of LG Electronics UK, told TechRadar recently. We hope his predictions hold and we aren’t ruling out OLED as a big player in the next generation of televisions.
I’ve heard Netflix is going to start streaming in something called HDR. What is that?
HDR, UHD, OLED … there’s no shortage of acronyms in home entertainment.
HDR, or ‘High Dynamic Range’ refers to a TV that is capable of displaying a wider range of brightnesses than a ‘Standard Dynamic Range’ set. In practice this means brighter whites and darker blacks.
You’ll find that an HDR TV is able to make whites really sparkle, and for the darkness of the blacks to create an almost-3D effect within an image.
For more on the exciting technology check out our full guide to HDR.
Quantum Dot sounds like theoretical physics
It does indeed. But unlike some problems in theoretical physics, the solution is already here. Quantum Dot displays (QD for short) are simply LED panels with a thin film of nano-crystals in between the backlight and the display. Manufacturers like LG and Sony claim that this increases color depth by around 30% without adding extra pixels or implementing a wacky algorithm to digitally manipulate the display.
We went hands on with a few QD panels at CES 2015, including the LG UF9400 Quantum Dot 4K UHD TV and Samsung SUHD Curved TV, which uses a variation of Quantum Dot. We liked what we saw, mostly, and especially on the Samsung SUHD. The LG had some issues with oversaturation … but that may be fixed by the time the TV comes to market in Q2 2015.
What about 4K content? Can I get that?
Yeah, about that… There’s actually not much 4K broadcast content to be had right now. That said, if you’re willing to shell out for it – e.g. buy a 4K UHD Blu-ray player and several 4K Blu-ray discs or purchase digital UHD movies outright from services like Sony’s Ultra Streaming Service or UltraFlix – there are plenty of other options out there.
Why isn’t broadcast TV in 4K?
Because every 4K frame contains four times the information of HD, 4K content is four times more bulky than regular HD content in terms of its raw file size. That makes it a challenge to get it to you. Broadcast TV hasn’t made the 4K switch yet (indeed, it’s only recently that hard drive sizes have gotten big enough to manage DVRing HD programs comfortably).
But you can get 4K Blu-ray discs should you decide to buy a Ultra-HD Blu-ray player.
- Check out our guide to the best 4K Blu-ray players.
On the streaming side, bandwidth is a definite issue. The internet’s bandwidth is already dominated by Netflix’s traffic, prompting ISPs to go after them for extra cash, and that’s with most of its streams at SD and HD levels. Upping everything to 4K doesn’t sound like a reasonable option just yet. And even if it were possible to stream 4K content to everyone without breaking the internet, streaming 4K content requires a 25Mbps or faster downstream internet connection, which is faster than most people have at the moment.
So what can I watch?
Your best UHD options right now come from Sony, Netflix and Amazon.
Sony launched its Video Unlimited 4K service in 2013, which offers more than 70 films and TV shows for rental or purchase. It requires Sony’s 4K Ultra HD Media Player, the FMP-X1 ($350), which comes with a 2TB hard drive and is only compatible with Sony 4K TVs. 24-hour TV show rentals are $4 and 24-hour film rentals cost $8. Film purchases are $30. It’s not exactly instant gratification, though. Once you rent or buy something, it needs to download to your player, which Sony estimates can take 8 to 15 hours, depending on your Internet connection, so you’d better think ahead if you’re planning a 4K movie night.
If you want to watch right away, Netflix is leading the 4K streaming waters with select shows (House of Cards, Breaking Bad, The Blacklist) and films (Ghostbusters, The Smurfs 2). Currently, however, the content selection is limited at best. Netflix requires new subscribers to be on the highest tier four-stream Family Plan in order to access 4K content. Existing subscribers will be grandfathered into 4K for two years on their existing lower-tier plans.
That said, Amazon has also gotten into the 4K UHD streaming game by offering some of its highest-rated shows – Transparent, Mozart in the Jungle, Man in the High Castle and Mad Dogs – in Ultra HD.
Both streaming services say even more content is on its way and expects the roll-out to ramp up once more TV watchers make the jump to the higher-resolution standard.
Is it me or are those options are almost comically limited?
It’s not you.
Why are we even talking about 4K then?
Because it’s awesome. Seriously, the pictures look amazing. You’re going to love it.
What about gaming in 4K?
We’ve had 4K gaming on the PC for a while now, but this year at E3 2016 4K took off in a big way with the announcement of Microsoft’s 4K Xbox code-named Project Scorpio. Alongside the Scorpio, Microsoft also has the Xbox One S which will upscale HD content to 4K as well as play Ultra HD Blu-ray discs.
Microsoft isn’t the only console manufacturer with a 3840 x 2160 resolution on its mind, however. Sony just announced a 4K console of its own called the PS4 Pro that not only plays 4K Ultra HD movies and TV shows from streaming services like Netflix, but can play games in 4K, too.
What kind of cables will I need for 4K?
The two standard cables you’re most likely to use are either a standard HDMI or if you’re connecting a PC to a Ultra HD monitor, DisplayPort.
HDMI cables now come in four flavors: high speed with ethernet; high speed without ethernet; standard speed with ethernet and standard speed without ethernet. Standard speed cables are capable of 1080i, but aren’t able to handle the bandwidth of 4K. High speed cables can do anything higher than 1080. Now, as long as you’re using the same class of cable, there is no distinguishable difference in terms of performance between one manufacturer’s set of cables and another’s.
The speed of your connection will depend on the types of connectors, which includes HDMI 1.4, HDMI 2.0 and HDMI 2.0a. HDMI 1.4 connectors support a 3820×2160-resolution at 30 frames per second, while HDMI 2.0 is the latest spec and can output video at Ultra HD resolution at 60 frames per second. (But more on that below!) HDMI 2.0a is capable of HDR, which is limited to a very specific range of televisions from each manufacturer.
The other type of cable you can use is DisplayPort. DisplayPort carries 4K image and audio signal from most high-end graphics cards to monitors without any noticeable artifacts or delays.
So should I buy a 4K set now or should I wait?
It depends. If you want the absolute best TV you can get right now and don’t mind paying a premium for it, it’s a 4K set. If you’re buying from one of the top tier manufacturers, you’re going to get a good product that’s reasonably future-proofed. As we said before, the sets look great. However, don’t expect to be watching most of your video content in 4K for another two to three years. And make sure any set you buy has HDMI 2.0 ports (the first wave of 4K TVs used the previous HDMI 1.4 standard).
On the other hand, if you’re price sensitive or want to wait until the content side of the equation is a bit more solved, it absolutely makes sense to wait. The UHD Premium specification is still in its infancy, and although we’re moderately sure and it remains to be seen if the entire industry will eventually adopt it.
In terms of content you’re not missing out on much at the moment. There are incredible values to be found in generously-sized 1080p sets right now. And 4K sets are only going to get cheaper.
Scott Alexander originally contributed this article